Crestron DM-TX-4KZ-202-C 4K60 4:4:4 HDR Transmitters 202 - New, Open Box SKU: DM-TX-4KZ-202-C-OB
New
DigitalMedia 8G+® 4K60 4:4:4 HDR Transmitters 202
Provides a multi-input, auto-switching interface and controller for 4K HDMI® sources as part of a complete DigitalMedia™ System. Supports 4K60 4:4:4 and HDR video signals. Connects to the DM 8G+® input of a DM® Switcher or Receiver via a single CATx cable. Includes IR, RS-232, and Ethernet control ports, and USB HID device and host signal extension ports. Compatible with HDBaseT® technology and Crestron Connect It™ cable caddy.
Key Features
- 4K DigitalMedia 8G+® transmitter and multimedia interface
- Built-in 2x1 AV switcher with two HDMI® input3
- QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching
- Connects to a DM® switcher or receiver over a single CAT type twisted pair cable1
- Supports cable lengths up to 330 ft (100 m) for all resolutions up to UHD and 4K using DM Ultra cable1
- Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e1
- Supports cable lengths up to 230 ft (70 m) for UHD and 4K using DM 8G cable, or 165 ft (50 m) using CAT5e1
- HDBaseT® Certified standard — Enables direct connection to other HDBaseT certified equipment
- Local HDMI output (DVI compatible6)
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®,DTS:X®, and uncompressed 7.1 linear PCM audio
- HDCP 2.2 compliant
- Performs automatic AV signal format management via EDID
- Enables device control via CEC, IR, RS-232, and Ethernet
- Enables USB HID signal extension for a local computer5
- Compatible with Crestron® USB over Ethernet Extenders7
- Compatible with Crestron Connect It™ Cable Caddies8
- Powered via the DM connection or optional power pack, PW‑2412WU, (sold separately)4,5
- The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum Cable Lengths” table for a detailed overview. Crestron legacy cable models DM-CBL DigitalMedia Cable and DM-CBL-D DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables are sold separately.
- 4K60 4:4:4 performance and HDR support require the use of HDMI and DisplayPort cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Please be aware that bandwidth loss is cumulative, so performance may be reduced when inserting multiple cables and couplers inline.
- The HDMI inputs can accommodate a DVI or Dual-Mode DisplayPort signal using an appropriate adapter or interface cable. CBL-HD-DVI interface cables are available separately.
- To power the using HDBaseT PoE requires connection to a switcher or other equipment that has an HDBaseT PoE PSE port. Wiring that connects to a HDBaseT PoE+ PSE port is for intrabuilding use only
- To power the using PoDM+ (Power over DigitalMedia Plus) requires connection to a DM switcher or other DigitalMedia equipment that has a PoDM+ PSE port. Wiring that connects to a PoDM+ PSE port is for intrabuilding use only.
- The HDMI output can accommodate a DVI or Dual-Mode DisplayPort signal using an appropriate adapter or interface cable. CBL-HD-DVI interface cables are available separately.
- USB over Ethernet Extender Modules are sold separately. Refer to the Crestron USB over Ethernet Extenders (USB‑EXT‑DM‑LOCAL and USB‑EXT‑DM‑REMOTE) and Crestron USB over Ethernet Network Wall Plate Endpoints (USB‑NX2‑LOCAL‑1G and USB‑NX2‑REMOTE‑1G) spec sheets for more information.
- Crestron Connect It Cable Caddy (TT-100 series) sold separately. Refer to each product’s spec sheet for more information.
(DM-TX-4KZ-202-C-OB)
Maximum Cable Lengths |
|||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||
Maximum Resolutions |
|||||||||||||||||||||||||||||||||
NOTE: Custom resolutions may be supported at pixel clock rates up to 600 MHz*. |
|||||||||||||||||||||||||||||||||
Video |
|||||||||||||||||||||||||||||||||
Switcher | 2x1 manual or auto-switching, Crestron QuickSwitch HD technology | ||||||||||||||||||||||||||||||||
Input Signal Types | HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support 2 (DVI & Dual-Mode DisplayPort™ compatible 3); | ||||||||||||||||||||||||||||||||
Output Signal Types | DM 8G+ & HDBaseT w/, Deep Color, 3D, & 4K60 4:4:4 support; HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support 2 (DVI compatible 6) | ||||||||||||||||||||||||||||||||
Copy Protection | HDCP 2.2 | ||||||||||||||||||||||||||||||||
Audio |
|||||||||||||||||||||||||||||||||
Switcher | 2x1 audio-follow-video | ||||||||||||||||||||||||||||||||
Input Signal Types | HDMI (Dual-Mode DisplayPort compatible 3) | ||||||||||||||||||||||||||||||||
Output Signal Types | DM 8G+ & HDBaseT, HDMI | ||||||||||||||||||||||||||||||||
Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio™,DTS:X, LPCM up to 8 channels | ||||||||||||||||||||||||||||||||
Communications |
|||||||||||||||||||||||||||||||||
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | ||||||||||||||||||||||||||||||||
USB Host | Supports signal extension of USB HID class devices, supports a TT-100 series cable caddy 8 | ||||||||||||||||||||||||||||||||
USB Device | USB HID signal extension to a USB host, supports computer console (for setup) | ||||||||||||||||||||||||||||||||
RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system) | ||||||||||||||||||||||||||||||||
IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 V) up to 19.2k baud (via control system) | ||||||||||||||||||||||||||||||||
DigitalMedia | DM 8G+, HDCP 2.2, EDID, CEC, PoDM + Ethernet | ||||||||||||||||||||||||||||||||
HDBaseT | HDCP 2.2, EDID, RS-232, PoE+, Ethernet | ||||||||||||||||||||||||||||||||
HDMI | HDCP 2.2, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system. |
||||||||||||||||||||||||||||||||
Connectors |
|||||||||||||||||||||||||||||||||
24 VDC 1.0 A | (1) 2.1 x 5.5 mm DC power connector; 24 VDC power input; PW‑2412WU, optional power pack (sold separately) |
||||||||||||||||||||||||||||||||
DM OUT | (1) 8-pin shielded RJ-45, female; DM 8G+ output, HDBaseT compliant; PoDM+ PD port (HDBaseT PoE+ compatible) 4,5; Connects to the DM 8G+ input of a DM switcher, receiver, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM‑CBL‑8G cable, or Crestron DM‑CBL‑ULTRA cable 1 |
||||||||||||||||||||||||||||||||
HDMI OUT | (1) HDMI Type A, female; HDMI digital video/audio output (DVI compatible 6) 2 |
||||||||||||||||||||||||||||||||
HDMI IN 1 – 2 | (2) HDMI Type A, female; HDMI digital video/audio inputs; (DVI & Dual-Mode DisplayPort compatible 3) 2 |
||||||||||||||||||||||||||||||||
USB HID | (1) USB Type A, female; SB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device (USB signal extension & routing), or for connection of a Crestron TT-100 series device (Crestron Connect It) 8 |
||||||||||||||||||||||||||||||||
COMPUTER | (1) USB Type B, female; USB 2.0 device port for computer console (setup), or for connection to a computer or other USB HID-compliant host (USB signal extension & routing) |
||||||||||||||||||||||||||||||||
LAN | (1) 8-pin RJ-45, female; 10Base-T/100Base-TX Ethernet port |
||||||||||||||||||||||||||||||||
COM | (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support |
||||||||||||||||||||||||||||||||
IR | (1) 2-pin 3.5 mm detachable terminal block; IR/Serial port; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 V) up to 19200 baud |
||||||||||||||||||||||||||||||||
Ground | (1) 6-32 screw; Chassis ground lug |
||||||||||||||||||||||||||||||||
Controls & Indicators |
|||||||||||||||||||||||||||||||||
24 VDC | (1) Green LED, indicates operating power supplied via PoDM+, HDBaseT PoE+, or the optional PW‑2412WU power pack (sold separately) | ||||||||||||||||||||||||||||||||
DM OUT | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence | ||||||||||||||||||||||||||||||||
HDMI OUT | (1) Green LED, indicates HDMI signal presence at the HDMI output | ||||||||||||||||||||||||||||||||
HDMI IN 1 – 2 | (2) Green LEDs, each indicates HDMI signal presence at the corresponding HDMI input | ||||||||||||||||||||||||||||||||
LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | ||||||||||||||||||||||||||||||||
SETUP | (1) Red LED and (1) recessed pushbutton for Ethernet setup | ||||||||||||||||||||||||||||||||
RESET | (1) Recessed pushbutton for hardware reset | ||||||||||||||||||||||||||||||||
Power |
|||||||||||||||||||||||||||||||||
Power over DM (PoDM) | IEEE 802.3at Type 2 Class 4 (25.5 W) compliant PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment) 4 | ||||||||||||||||||||||||||||||||
Power over HDBaseT | IEEE 802.3at Type 2 Class 4 (25.5 W) compliant HDBaseT PoE+ PD (Powered Device), capable of being powered by an HDBaseT PoE+ PSE (Power Sourcing Equipment) 5 | ||||||||||||||||||||||||||||||||
Power pack (optional) | Input: 100-240 VAC, 50/60 Hz Output: 1.25 A @ 24 VDC Model: PW‑2412WU (sold separately) |
||||||||||||||||||||||||||||||||
Power Consumption | 11.9 Watts typical using power pack; 12.7 Watts typical using PoDM+ or HDBaseT PoE+; (without a USB powered device connected) |
||||||||||||||||||||||||||||||||
Environmental |
|||||||||||||||||||||||||||||||||
Temperature | 32° to 104° F (0° to 40° C) | ||||||||||||||||||||||||||||||||
Humidity | 10% to 95% RH (non‑condensing) | ||||||||||||||||||||||||||||||||
Heat Dissipation | 40.6 BTU/hr using power pack; 43.3 BTU/hr using PoDM+ or HDBaseT PoE+ |
||||||||||||||||||||||||||||||||
Enclosure |
|||||||||||||||||||||||||||||||||
Chassis | Metal, black finish, with (2) integral mounting flanges, vented top, front, and bottom | ||||||||||||||||||||||||||||||||
Mounting | Freestanding, surface mount, or attach to a single rack rail | ||||||||||||||||||||||||||||||||
Dimensions |
|||||||||||||||||||||||||||||||||
Height | 11.02 in (280 mm) | ||||||||||||||||||||||||||||||||
Width | 5.34 in (136 mm) | ||||||||||||||||||||||||||||||||
Depth | 1.07 in (27 mm) | ||||||||||||||||||||||||||||||||
Weight |
|||||||||||||||||||||||||||||||||
19.2 oz (545 g) | |||||||||||||||||||||||||||||||||
Compliance |
|||||||||||||||||||||||||||||||||
UL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital device, WEEE |
SKU | DM-TX-4KZ-202-C-OB |
Barcode # | 608539064335 |
Brand | Crestron |
Brand | Crestron |
Type | Video Extender |
Model | DM-TX-4KZ-202-C |
Shipping Cubic | 0.017794000m3 |
Be The First To Review This Product!
Help other Australian Computer Traders users shop smarter by writing reviews for products you have purchased.
Frequently Bought Together
Others Also Bought
Similar Items
Buying refurbished laptops not only gives you savings it helps reduce the environmental impact of e-waste