New, Unused, Open Box item.

The HD-TX-101-C-E is a DM Lite® surface-mountable transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI® signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K.

Key Features

  • Pairs with a DM Lite® or DMPS Lite™ receiver
  • Enables extension of HDMI® video and audio signals
  • Links to the receiver via a single CAT5e (or higher) twisted pair cable
  • Supports 4K and UHD at up to 130 ft (40 m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI, DVI, and Dual-Mode DisplayPort™ sources
  • USB power port supplies power to USB powered devices
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Low-profile surface mount design
  • Universal 100-240V power pack included
  1. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or higher cable). The maximum cable length is 230 ft (70 m) for resolutions up to 2K or 130 ft (40 m) for higher resolution signals up to 4K. Refer to the “Maximum DM Lite Link Cable Lengths” table for a more detailed overview. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  2. The power pack may be connected to either the transmitter or receiver. Only one power pack is required. Do not connect more than one power pack. DM Lite devices are not compatible with PoE or PoDM.
  3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

(HD-TX-101-C-E-OB)

Video
Input Signal Type HDMI with Deep Color, 3D, and 4K (DVI and Dual-Mode DisplayPortTM interface compatible3)
Copy Protection HDCP 2.2
Maximum Resolutions
Scan
Type		 Resolution Frame
Rate		 Color
Sampling		 Color
Depth
Progressive 4096x2160 DCI 4K
&
3840x2160 4K UHD		 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz.

Audio
Input Signal Type HDMI (Dual-Mode DisplayPort interface compatible3)
Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels

Communications
HDMI HDCP 2.2, EDID, CEC pass-through
DM Lite Link Proprietary link for connection between one DM Lite transmitter and receiver only

Connectors
24VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW-2412WU power pack included;
Note: This connection powers both the transmitter and receiver.2
TO RX (DM Lite) (1) 8-pin RJ-45 connector, female, shielded;
DM Lite link port for connection to a DM Lite or DMPS Lite receiver1
HDMI IN (1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible3)
POWER ONLY (1) USB Type A connector, female;
USB power port (500 mA maximum output);
Supplies power for a Crestron Multihead HD Video Cable (CBL-MULTI-HD-6, sold separately) or other USB powered device

Indicators
PWR (1) Green LED, indicates operating power is supplied from the power pack via the 24 VDC input or from the receiver via the DM Lite link
HDMI IN (1) Green LED, indicates HDMI input signal presence
LINK (1) Green LED, indicates the DM Lite link status
TO RX (DM Lite) (2) LEDs on RJ-45 connector, green LED indicates DM Lite link status, amber LED indicates a valid video signal

Power
Power Pack (included) Input: 100-240 VAC, 50/60 Hz;
Output: 1.25 Amps @ 24 VDC;
Model: PW-2412WU
NOTE: The transmitter and receiver are powered together using a single power pack connected at either the transmitter or receiver.2

Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 20% to 90% RH (non-condensing)
Heat Dissipation 13.0 BTU/hr

Construction
Chassis Metal, black finish, with (2) integral mounting flanges, vented sides
Mounting Freestanding, surface-mountable, or attach to a single rack rail

Dimensions
Height 1.26 in (32 mm)
Width 4.21 in (107 mm)
Depth 4.05 in (103 mm)

Weight
9.92 oz (281 g)

Compliance
UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
Regulatory Model HD-TX-101-C-E

Maximum DM Lite Link Cable Lengths
 
 
Resolution		 Cable Type
CAT5e (or higher),
DM-CBL-ULTRA DM® Ultra Cable, or
DM-CBL-8G DM 8G DM 8G® Cable1
1920x1080 FHD 1080p 230 ft (70 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 DCI 2K
2048x1152 QWXGA
2560x1080 UWFHD 130 ft (40 m)
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 4K UHD
4096x2160 DCI 4K
  1. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or higher cable). The maximum cable length is 230 ft (70 m) for resolutions up to 2K or 130 ft (40 m) for higher resolution signals up to 4K. Refer to the “Maximum DM Lite Link Cable Lengths” table for a more detailed overview. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  2. The power pack may be connected to either the transmitter or receiver. Only one power pack is required. Do not connect more than one power pack. DM Lite devices are not compatible with PoE or PoDM.
  3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
SKU HD-TX-101-C-E-OB
Barcode # 608539311453
Brand Crestron
Brand Crestron
Type Video Extender
Model HD-TX-101-C-E
Shipping Cubic 0.017794000m3

Be The First To Review This Product!

Help other Australian Computer Traders users shop smarter by writing reviews for products you have purchased.

Write a product review

Frequently Bought Together

Similar Items

Buying refurbished laptops not only gives you savings it helps reduce the environmental impact of e-waste

Find Out More