New, Unused, Open Box item.

The HD-RX-201-C-E is a surface-mountable DM Lite receiver designed to pair with a DM Lite transmitter to form a point-to-point signal extender for HDMI® signals. It features a built-in HD video scaler and handles video resolutions up to HD 1080p and WUXGA. It supports Dolby Digital®, DTS®, and 8-channel LPCM surround sound audio formats, and includes a stereo analog audio output.[1] It also includes a local HDMI input to supplement the input(s) at the transmitter. The HD-RX-201-C-E links to the transmitter using a single CAT5e (or better) twisted pair cable and supports cable lengths of up to 230 ft (70 m).[2]

Key Features

  • Pairs with a DM Lite transmitter to provide a point-to-point signal extender, switcher, and HD video scaler
  • Enables extension of HDMI® video and audio signals
  • Also provides a local HDMI input and analog audio output [1]
  • Auto-switches between the local HDMI input and the input(s) on the transmitter
  • Links to the transmitter via a single CAT5e (or better) twisted pair cable[2]
  • Supports HD 1080p and WUXGA at up to 230 ft (70 m)
  • Automatically scales input signals to match the room display
  • Performs deinterlacing of NTSC, PAL, and 1080i sources
  • Handles Deep Color
  • Supports Dolby Digital® 5.1, DTS® 5.1, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI and DVI display devices[4]
  • Compatible with HDMI, DVI, and Dual-Mode DisplayPort sources[5]
  • HDCP 1.4 compliant
  • Supports stereo audio de-embedding via the analog audio output [1]
  • Provides up to 150 ms lip-sync delay at the analog output
  • QuickSwitch HD™ technology manages HDCP keys for fast, reliable switching
  • Includes comprehensive built-in EDID configuration tools
  • 10/100 Ethernet LAN connection
  • Easy web browser setup and configuration
  • Enables display device control via CEC, IR, or RS-232
  • Automatically turns the display on and off based on input signal detection
  • Allows control system integration for fully programmable functionality
  • Low-profile surface mount design
  • Universal 100-240V power pack included[3]

 

  1. The analog audio output is only active when the input source is transmitting a 2-channel stereo signal.
  2. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or better). The maximum cable length is 230 ft (70 m). Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+ (DM 8G+), HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  3. The power pack may be connected to either the transmitter or receiver. Only one power pack is required. Do not connect more than one power pack. DM Lite devices are not compatible with PoE or PoDM.
  4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
  5. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

(HD-RX-201-C-E-OB)

Video
Switcher 2x1 manual or auto-switching, audio-follow-video
Scaler HD video scaler and deinterlacer, noise reduction, 3:2/2:2 pull-down detection and recovery, aspect ratio selection, VGA phase/clock & H/V position adjustments, picture and RGB color adjustments
Input Signal Types HDMI w/Deep Color (DVI & Dual-Mode DisplayPort compatible[5]), DM Lite link
Output Signal Types HDMI w/Deep Color (DVI compatible[4])
Copy Protection HDCP 1.4

Maximum Input Resolutions

Input Type Scan Type Resolution Frame Rate
HDMI
&
DM Lite Link		 Progressive 1920x1200 WUXGA 60 Hz
1920x1080 HD 1080p 60 Hz
Interlaced 1920x1080 HD 1080i 30 Hz

NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 165 MHz
Scaler Output Resolutions, Progressive Auto, 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 840x480@60Hz, 1024x768@60Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz[6], 1280x800@60Hz[6], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz[6], 1400x1050@60Hz[6], 1440x900@60Hz[6], 1600x900@60Hz[7], 1600x1200@60Hz, 1680x1050@60Hz[6], 1920x1080@30/50/60Hz (1080p30/50/60), 1920x1200@60Hz[7]
Scaler Output Resolutions, Interlaced Auto, 480i, 576i, 1080i25, 1080i30

Audio
Input Signal Types HDMI (Dual-Mode DisplayPort compatible[5]), DM Lite link
Output Signal Types HDMI, analog stereo[1]
Digital Formats Dolby Digital, Dolby Digital EX, DTS, DTS ES, DTS 96/24, LPCM up to 8 channels
Analog Formats Stereo 2-channel[1]
Digital-To-Analog Conversion 24-bit 48 kHz
Analog Output Volume -80 to +20 dB Level adjustment range, plus Mute
Analog Output Lip-Sync Delay 0 to 150 ms (maximum delay time is reduced for input signals with sampling rates over 48 kHz)
Analog Performance Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >93 dB, 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >80 dB

Communications
Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, web browser setup and control, Crestron control system integration
RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
IR 1-way device control via infrared up to 60 kHz
HDMI HDCP 1.4, EDID, CEC
DM Lite Link Proprietary link for connection between one DM Lite RX & TX only
Note: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control system (inclusive of the local HDMI ports and those on the transmitter), does not support IR or RS-232 signal extension over the DM Lite link

Connectors
HDMI, INPUT 1 (1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI & Dual-Mode DisplayPort compatible[5])
FROM TX, INPUT 2 (1) 8-pin RJ45 connector, female, shielded;
Link port for connection to a DM Lite transmitter[2];
Maximum cable length: 230 ft (70 m)
HDMI OUTPUT (1) HDMI Type A connector, female;
HDMI digital video/audio output (DVI compatible[4])
AUDIO L/R (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output[1];
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
IR (1) 2-pin 3.5 mm detachable terminal block;
IR output control port;
Supports IR up to 60 kHz;
IRP2 emitter sold separately;
Note: Provides power on/off control of the display device without a control system, or fully programmable control of any device with a control system. Does not support IR signal extension over the DM Lite link.
COM (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Supports RS-232 up to 115.2k baud with hardware and software handshaking;
Note: Provides power on/off control of the display device without a control system, or fully programmable control of any device with a control system. Does not support RS-232 signal extension over the DM Lite link.
LAN (1) 8-pin RJ45 connector, female;
10Base-T/100Base-TX Ethernet port
24VDC 1.25A (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2412WU power pack included;
Note: This connection powers both the receiver and transmitter[3]
SERVICE (1) USB Type A connector, female;
For factory use only

Indicators
FROM TX, INPUT 2 (2) LEDs (on RJ45 connector), green LED indicates DM Lite link status, amber LED indicates a valid video signal
LAN (2) LEDs (on RJ45 connector), green LED indicates Ethernet link status, amber LED indicates Ethernet activity
PWR (1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input or from the TX via the DM Lite link, turns amber while booting and green when operating
AUTO (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode it enabled
INPUT 1 – 2 (2) Pushbuttons for manual input selection, and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding input
SETUP (1) Red LED and (1) recessed pushbutton for Ethernet setup

Power
Power Pack (included) Input: 100-240 Volts AC, 50/60 Hz;
Output: 1.25 Amps @ 24 Volts DC;
Model: PW-2412WU
Note: The receiver and transmitter are powered together using a single power pack connected at either the receiver or transmitter (not both).[3]

Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 20% to 90% RH (non-condensing)

Construction
Chassis Metal, black finish, with (2) integral mounting flanges, vented sides
Mounting Freestanding, surface mount, or attach to a single rack rail

Dimensions
Height 1.11 in (28 mm)
Width 7.70 in (196 mm)
Depth 4.94 in (126 mm)

Weight
20.82 oz (590 g)
  1. The analog audio output is only active when the input source is transmitting a 2-channel stereo signal.
  2. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or better). The maximum cable length is 230 ft (70 m). Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+ (DM 8G+), HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  3. The power pack may be connected to either the transmitter or receiver. Only one power pack is required. Do not connect more than one power pack. DM Lite devices are not compatible with PoE or PoDM.
  4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
  5. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.
  6. With or without reduced blanking.
  7. With reduced blanking.
SKU HD-RX-201-C-E-OB
Barcode # 608539418213
Brand Crestron
Brand Crestron
Type Video Extender
Model HD-RX-201-C-E
Shipping Cubic 0.017794000m3

Be The First To Review This Product!

Help other Australian Computer Traders users shop smarter by writing reviews for products you have purchased.

Write a product review

Frequently Bought Together

Microsoft Office 365 Personal Microsoft Office 365 Personal

Microsoft Office 365 Personal

$109.00

  • 365 Day Subscription
  • Powerpoint, Outlook, Excel, Word and OneDrive Use
  • Android, iOS, MacOS and Windows

Similar Items

Buying refurbished laptops not only gives you savings it helps reduce the environmental impact of e-waste

Find Out More